Visual Vinyl's vinyl decals and graphics can be applied to any non-porous surface. It is best to avoid bumpy and irregular surfaces such as unpainted wood, stucco, brick, etc. First, clean the surface thoroughly on which the vinyl decals are to be applied to with either a window type cleaning product or with just soap and water. Be sure the surface is completely dry and if you are using an alcohol based cleaner that the alcohol has completely evaporated before applying. Make sure that the temperature of the surface is between 60-80 degrees. If needed, a hair dryer may be used to warm up the surface. Be sure to use caution because some surfaces may be damaged if direct heat is applied, so use heat at your own discretion.

vinyl decals are easily removable as well if needed, but once removed they are not able to be re-used. All you have to do is apply a small amount of heat with a hair dryer to the area to be removed, so that the surface is warm to the touch. Peel the corner back with either a knife or tweezers, until you are able to grasp the vinyl decals with your fingers. Next you will need to slowly pull at a 90 degree angle, applying small amounts of heat if need be. When you are finished removing the vinyl decals, wipe down the surface with an adhesive remover. Be sure to test a small area first so as to not cause any damage to your finish.

At Visual Vinyl, they hope to be the source of all your vinyl decals, car stickers and car decals for whatever it may be that you're looking for. Whether you use their vinyl decals for your car, truck, boat, or even business advertising, you will be satisfied with the choice you have made to use Visual Vinyl.