Applying wall decals are easier than you may think, however different sizes require different methods of application. Larger vinyl wall decals that cannot be cut into segments can be applied using with what is called the Wet method. This method is a little more forgiving than the standard method of application as described on their website especially with larger vinyl wall decals and makes it easier to position the wall decals and squeegee out any air bubbles trapped in between the wall decals and the surface. You need to start with a clean empty spray bottle and fill it with cold water and 3-4 drops of dishwashing soap. Next, lightly mist the surface of which the wall decals are to be applied to, then remove the backing of the wall decals and then place the wall decals in the desired location. Very carefully, while holding the wall decals in place, use a squeegee and work from the center of the wall decals out towards the edges and work out any excess solution and air bubbles. Allow the wall decals to dry for at least 15 minutes and then lightly mist the application tape/backing tape and carefully remove it from one corner working in a diagonal direction. If an edge of the wall decals lifts up, simply squeegee the wall decals back down and wait a little longer for the solution to dry before attempting to remove the tape again. You will need to allow the wall decals to dry for at least 48 hours for best results.

Visual Vinyl takes pride in representing your interests and advertising for your business. They know that looks are everything and they will do whatever it takes to make sure that you, the customer are entirely satisfied with your product and happy about your wall decals purchase. They stand behind their wall decals and car stickers and their 100% satisfaction guarantee!